Weider C720 Manual do Utilizador descarregar pdf (Página 19)

38. Attach the Seat (10) to the Bench Frame (1) with

four M6 x 16mm Screws (29).

39. Attach the Weight Tube (76) to the Leg Lever (5)

with an M8 x 58mm Bolt (75), two M8 Washers

(60), the 10mm Spacer (21), and an M8 Nylon

Locknut (17).

Press the 25mm

Angled Outer Cap (61) onto the

indicated end of the Weight Tube (76).

37. Insert the Backrest Bracket (16) into the slot in

the Bench Frame (1).

Attach the Backrest Frames (6) to the Bench

Frame (1) with an M10 x 156mm Bolt (100), two

M10 Washers (35), and an M10 Nylon Locknut

(34). Do not overtighten the Nylon Locknut;

he Bracket Frames must be able to pivot eas-

ily.

See the inset drawing.

Insert the Bench Pin (23)

into the Bench Frame (1) and one of the adjust-

ment holes in the Backrest Bracket (16).

See steps 32 to 35. Tighten the M10 Nylon

Locknuts (34).

100

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Sem comentários

Weider C720 Manual do Utilizador Página 19